Fixed and Mobile Crushing Production Line

Fixed and mobile broken production lines, breaking the single model, giving customers more choices. These are the multiple needs of current users, both fixed crushing production lines and mobile crushing production lines. If it was put a few years ago, there was no other choice. Only fixed production lines. Now it breaks the single model and allows customers to have With more choices, the following describes the configuration, applicable environment and quotation of these two crushing production lines.

Details of fixed crushing production line

Preparation for use: The fixed crushing production line uses fixed crushing equipment. Its use requires infrastructure construction according to the production process. The equipment must be fixedly installed on the cement or steel rack, and then each equipment is connected by a belt conveyor. It is relatively large, and each switch needs to be manually turned on during operation.

Configuration: depending on production conditions, such as:

Hammer Crusher

  1. Solution one, for large-shape and high-hardness stone, the configuration is: feeder + jaw crusher + cone crusher + screening machine
  2. Solution two: For large-shaped soft materials, the configuration is: feeder + jaw crusher + impact crusher + screening machine
  3. Solution three: For one-time forming of large-shaped soft materials, the configuration is as follows: feeder + hammer crusher + screening machine
  4. Solution four: For small-shaped soft materials, the configuration is: feeder + impact crusher + screening machine

Mobile crushing production line details

Preparation for use: The main equipment used in the mobile crushing production line is the mobile crusher. Because it has a mobile rack, it is equivalent to being fixed at the factory, so it does not require such long-term pre-preparation for piling and infrastructure construction. Buy and use as you go directly to the crushing site, it is more convenient to enter and exit the site. When using it, you need to tightly connect the various machines together, and this new device is also more intelligent, and you can open each button. Started working.

Configuration: depending on production conditions, such as:

  1. Solution one: For large-shaped and high-hardness stone, the configuration is: feeder + mobile jaw crusher + mobile cone crusher + screening machine
  2. Solution two: For large-shaped soft materials, the configuration is: feeder + mobile jaw crusher + mobile impact crusher + screening machine
  3. Solution three: For one-time forming of large-shaped soft materials, the configuration is as follows: feeder + mobile hammer crusher + screening machine
  4. Solution four: For small-shaped soft materials, the configuration is: feeder + mobile impact crusher + screening machine

Note: The specific model can be determined according to the output requirements. The feeder and sieving machine can be equipped with the crusher separately or at the same time in the same mobile rack. In the same car, the feeders and screening machines in the third and fourth schemes can ride on the same car with the hammer crusher and the impact crusher at the same time.

Applicable environment: Mobile crushing production lines can be divided into two categories, one is the tire mobile crushing production line, and the other is the crawler mobile crushing production line. Both of these are suitable for small areas and flexible changes. More powerful performance, can climb uphill, suitable for more complicated and difficult environment.

Quotation: It is more expensive than the fixed crushing production line. Among them, the price of a single tire mobile crusher starts from 500,000 to 500,000, while a single crawler mobile crusher starts at about 780,000. And a mobile crushing production line has Single operation, some are dual operation, and even three-machine combined operation, so the range of its quotation is also relatively large, and some mobile crushing production line is only 700,000, 800,000, and some require three or four million, However, the amount of investment is different, and the return is also different. From the perspective of the sand and gravel industry, the more the investment is, the more the return is when the raw materials are suitable.

Other News